

Гаранция | 24 месеца |
Размери | 120 x 120 x 28 mm |
Обороти | до 1900 RPM |
Ниво на шум | до 31 dBA |
Въздушен поток | до 54.3 CFM |
Конектор | 7-pin |
Reverse | Да |
Цвят | Черен |
Подсветка | ARGB |
! |
|
Elevate your PC setup with UNI FAN TL LCD black and white fans, available in 120mm and 140mm sizes with normal and reverse
blades.
Meet all kinds of configuration needs with our full lineup.
Note: Do not mount the fan with the LCD facing inward, as it may result in damage to the screen.
The world’s 1st PC case fan with a LCD screen, which can be personalized and controlled using L-Connect 3.
● Power PCIe Cable |
● 500 (TYP) nits Brightness |
● SRGB-24-bit Full Color |
|
|
|
● 400 × 400 Resolution |
● IPS Type Display |
Monitor the temperature and loading of your CPU and GPU, as well as the fan speed, instantly with
built-in hardware monitor dashboards on the screen.
Note: The more sensors used, the higher the CPU load will be. We suggest you to keep sensor display at a maximum of 3.
Elevate your system’s style by uploading your own personalized MP4 / GIF / JPG / PNG.
Building on the design success of the UNI FAN series interlocking system, the UNI FAN TL series
takes clutter-free setups to the next level.
Experience a hassle-free setup with the slide-in daisy-chaining
mechanism, securely holding the fans in place and ensuring a
snug fit for easy configuration.
A single cable is all you need to connect a group of up to 3 TL
LCD fans to the controller, which supports a maximum of 7 TL
LCD fans per controller, with a group of 3 on each port (up to
16 TL+TL LCD fans in total).
To operate 8 to 12 TL LCD fans, please use 2 controllers
simultaneously. Note that L-Connect 3 doesn’t support more
than 13 TL LCD fans.
Note: The controller cable is only applicable on the pin side of the fan, do not
install it the other way.
The interlocking key at the end of TL LCD fans is removable for
enhanced compatibility and less interference with other
components.
UNI FAN TL LCD is engineered for stable fan blade operation, ensuring efficiency at a low noise level.
METAL BEARING SHELLTo securely hold the impeller to theshaft |
MAGNETIC RUBBER RINGTo provide extra support for fan |
STATORTo provide a rotating magnetic field that generates momentum |
BRAZZ NUTTo Prevent oil leaks |
FLUID DYNAMIC BEARING (FDB)To effectively reduce the internal |
SHAFT AND COPPER BASETo ensure fan blade stability during |
THICKER FAN FRAME28mm thick fan frame helps deliver |
RUBBER PADSTo reduce vibrations and maintain |
Redefining PC cooling experience with a fan that doesn’t compromise on thermal control, all while offering a personalized screen
for a touch of individuality.
Able to set different fan speeds for each fan cluster to optimize different scenarios of use providing
flexibility for radiator or case fan needs with L-Connect 3.
Each UNI FAN TL fan has 26 LEDs with an elegant side diffuser on the 2 sides of the fan frame that
wraps around the edges of the anti-vibration pad.
Illuminate your setup with the UNI FAN TL’s enlarged infinity
mirror (30% larger than UNI FAN SL-INF on the side) on both
sides of the frame, showcasing clear and 0.7mm gap multi-
layer lighting effects.
Easily customize different lighting effects on the two sides of the LED strips using L-Connect 3 for a
unique setup. You can also sync your TL fans and apply the same lighting effect you like across all of
them.
Cover the screws with anti-vibrate rubber pads for a seamless and uninterrupted aesthetic appeal.
L-Connect 3 offers complete control over the UNI FAN TL series, including the lighting
effects, fan speed, and LCD screen.
Note: Please update firmware at Settings > Device for the first time use.
UNI FAN TL and TL LCD share the same controller, enabling the connection of up to 16 TL and TL LCD fans simultaneously, with a
maximum of 7 TL LCD fans.
Note: TL and TL LCD share the same controller but use different controller cables. Do not mix the controller cables.
Each port supports a maximum of 10 TL fans or 3 TL LCD fans
Note: The 1st port doesn’t support TL LCD.
Power PCIe CablePower up the connected fans |
USB CablePlug directly into a motherboard 9-pinUSB header |
5V ARGB / 4 PIN PWM CableRequired for motherboard sync function |
Note: Do not use a splitter; plug directly for a
stable signal
Note: The controller is available separately or in a triple pack only. UNI FAN TL series fans without the controller will not be functional.
PRODUCT NAME | UNI FAN TL LCD 120 Reverse Blade | MAX. AIR PRESSURE | 2.83 mmH2O (Maximum) |
MODEL | 12RTLLCD3B | MAX. AIRFLOW | 54.3 CFM (Maximum) |
COLOR | Black | ACOUSTIC NOISE | 31 dB(A) Max |
NUMBER OF FANS | 3 | INPUT POWER | 7.08W |
CONTROLLER | Yes | MATERIAL | PA66 / PBT |
CONNECTOR TYPE | UNI FAN Controller Cable x 1 (P-7P) | RATED VOLTAGE | DC 12V (FAN) & 5V (LED) |
FAN DIMENSION | 124 x 120 x 28 mm | BEARING TYPE | Fluid Dynamic Bearing (FDB) |
FAN SPEED | 0, 350~1900 RPM | OPERATE VOLTAGE | DC12V & 5V |