безплатна доставка
на поръчки над 149 лв.
02 4372440
Cart Cart

Arctic TP-3

Термопроводящ пад ARCTIC TP-3, 100 x 100 x 1 mm

Арт. номер: ARCTIC-ACTPD00053A
наличен
Виж наличност
Gplay София
Gplay Бургас
Gplay Велико Търново
Склад Шереметя

Запитване за Arctic TP-3

безплатна доставка
на поръчки над 149 лв.
Технически характеристики
Гаранция 72 месеца
Вид Термо подложка
Дебелина 1 мм

Свързани продукти

 

 

 

High Performance — Very Soft

Based on silicone and a special filler, TP-3 outperforms high-performance pads,
especially when height differences of closely spaced chips typically occur due to
manufacturing tolerances. The TP-3 offers excellent thermal conductivity despite
extremely low hardness.

 



Minimization of Thermal Resistance

The thinner the pad, the lower the thermal resistance. The TP-3 pad with a thickness of
0.5 mm can easily be compressed to 0.3 mm and thus compensate for height
differences between various components of up to 0.2 mm. Please note that due to the
extremely low hardness, the installation of the 0.5 mm pad requires extra care. Please
refer to the user manual.



Versatile Applications

Heat-conducting, vibration-damping, mouldable, electrically insulating — safe and easy
to use. Thanks to its good compression properties, the soft heat conduction pad is
particularly gentle on components and at the same time a good heat conductor. In
addition to the standard format for M.2, the TP-3 is available in various sizes and thicknesses,
which can be easily cut to the desired shape and size. This makes it ideal for RAMs,
chipsets, and ICs of all kinds, which are used in PCs, laptops, consoles, graphics cards,
and electronic devices in general.

 

 

 

 

Safe Handling

The ARCTIC TP-3 is electrically insulating, non-adhesive, and easy to handle. This
means that optimal and safe heat transfer can be ensured in many application areas.

 

 

 

Bridging Gaps

The TP-3 is softer than conventional pads and therefore particularly suitable for
different chip heights and possible tolerances. Thanks to their good compressibility
properties, the thermal pads act as the perfect gap filler and bridge uneven surface and
air gaps without stressing sensitive and protruding components.

 

 

 

Available in Different Thicknesses and Sizes

Our thermal pads are available in a choice of 0.5 mm, 1.0 mm, and 1.5 mm. The 0.5 mm
variant is ideally suited as an alternative to heat-conducting foil. The pads are available
in different dimensions, depending on their thickness. If required, the pads can also be
independently cut to any size.

Specifications

 

Colour Blue
Hardness 55 Shore OO
Continuous Use Temperature -40~150 °C
Specific Gravity 3.4 g/cm³
Dielectric Constant @1MHz 5.19
Volume Resistance 2.69 x 10¹² Ω-cm
Flammability Rating UL 94 V-0
Thermal Conductivity FAQ